To further ease the implementation time for our partners and simplify the integration into production environments, Scape has developed a number of additional hardware modules for mounting and integrating the SCAPE Products. The hardware components are all standardized, flexible and modular to ensure our partners have the ability to easily build SCAPE Bin-Pickers across leading robot platforms, for different parts and variable end-customer demands, by using the same set of basic SCAPE Hardware options fitting together in a modular way. The hardware components a lot of time consuming and custom development for each new project.

SCAPE Stationary Scanner Tower

OP18-HW


SCAPE Stationary Scanner Recognition - Tower

The Tower for the SCAPE Stationary Scanner Recognition™ is specifically designed to be the simplest choice and best option for all SCAPE Systems with the SCAPE Stationary Scanner. The Tower guarantees the highest stability and best scanning performance of the SCAPE Stationary Scanner.

Together with the SCAPE Stationary Scanner, cycle times in Bin-Picking applications can be lowered by up to 30%!
The Tower can be scaled for your needs and is available as a stand alone Scape product.

You can find the flyer here.

SCAPE Part Turner

PT10-0.5/01/03


SCAPE Part Turner

The SCAPE Part Turner is used after the SCAPE Orientation Control™ for turning parts in the gripper. The SCAPE Part Turner consists of a parallel gripper mounted on a rotary stage.
To turn the part, the following steps are performed:

  • Robot moves the part in between the open fingers of the SCAPE Part Turner. 
  • The SCAPE Part Turner closes the fingers and the robot lets go of the part and moves away. 
  • The rotary stage now rotates the part 180 degrees. 
  • The robot moves back and closes the fingers on the part – now from a new direction relative to the part. 
  • The SCAPE Part Turner opens the fingers. 
  • The robot now moves away with the part in a new position in the fingers.
     

Maximum Part Weight 0.5 kg for PT10-0.5.
Maximum Part Weight 1 kg for PT10-01.
Maximum Part Weight 3 kg for PT10-03.

Part-turner-3kg

PT10-01/03-HW


SCAPE Part Turner Column

The column is specifically designed to be the simplest choice and best option for SCAPE Part Turner with a requirement for a specific orientation of a part at the final placement. The pole together with the SCAPE Part Turner guarantees the highest stability for the SCAPE Bin-Picking System.

The Pole can be scaled for your needs and is available as a stand-alone SCAPE Part Turner with :

Maximum Part Weight 0.5 kg for PT10-0.5.
Maximum Part Weight 1 kg for PT10-01.
Maximum Part Weight 3 kg for PT10-03.

You can find the flyer here.

 

SCAPE CAST Station Column

OP17-01/02-HW


SCAPE Cast Station Column

The CAST Station Frame holds the CAST Station that Scape uses for self-tests and calibration of cameras and grippers.

With CAST Station, SCAPE can:

  • Calibrate and test the performance of the SCAPE Grid Scanner.
  • Test and validate the performance of suction cups on the SCAPE Tool Unit.
  • Test and validate the collision check of the SCAPE Tool Unit.
  • Measure and calibrate the accuracy of the SCAPE grippers.

You can find the flyer here.

SCAPE Handling Station Table and Tower

SL13/PL11-HW


SCAPE Handling Station Table & Tower

The Tower and Table for the SCAPE 3D Orientation Control™ are specifically designed to be the simplest choice and best option for all SCAPE systems with the SCAPE 3D Orientation Control. The hardware module guarantees the highest stability and best recognition performance of the SCAPE Orientation Control™.

You can find the flyer here.

Find Integrator